Service Mode Canon NP is used when we reset the
Error Code, set the paper size (cassette), and even control
the heat / temperature in Copiers
I'm sure you already know how to open the Service Mode, but not I wrote something here so that others can know, ok do the following:
1. Open the front door of the machine (front cover) and enter something on the door switch actuator for blocking it (usually I use folded paper). # Remember the machine in standby condition.
2. Servie mode press the button on a small hole in the bottom panel. (Use a stick or the like according to the size of the hole)
3. Press (*) key and press tombal figures, and press return (*) key. (For example: * 1 *), then it will appear on the screen display as shown below:
4. Press the << / >> to select the appropriate screen.
5. Perform adjustment (adjustment) and the examination. To accept user data input mode press the key (*).
6. To close or complete the Service Mode;
• Press the Reset key to ending the current mode.
• Press the Reset key twice to end the service mode.
• Or the power switch OFF to end the service mode.
Hopefully with this simple tutorial to help friends who have not been able to. Good luck "Service Mode Canon NP"
I'm sure you already know how to open the Service Mode, but not I wrote something here so that others can know, ok do the following:
1. Open the front door of the machine (front cover) and enter something on the door switch actuator for blocking it (usually I use folded paper). # Remember the machine in standby condition.
2. Servie mode press the button on a small hole in the bottom panel. (Use a stick or the like according to the size of the hole)
3. Press (*) key and press tombal figures, and press return (*) key. (For example: * 1 *), then it will appear on the screen display as shown below:
4. Press the << / >> to select the appropriate screen.
5. Perform adjustment (adjustment) and the examination. To accept user data input mode press the key (*).
6. To close or complete the Service Mode;
• Press the Reset key to ending the current mode.
• Press the Reset key twice to end the service mode.
• Or the power switch OFF to end the service mode.
Hopefully with this simple tutorial to help friends who have not been able to. Good luck "Service Mode Canon NP"