Service Mode Canon NP

Service Mode Canon NP is used when we reset the Error Code, set the paper size (cassette), and even control the heat / temperature in Copiers

I'm sure you already know how to open the Service Mode, but not I wrote something here so that others can know, ok do the following:

 

1. Open the front door of the machine (front cover) and enter something on the door switch actuator for blocking it (usually I use folded paper). # Remember the machine in standby condition.

2. Servie mode press the button on a small hole in the bottom panel. (Use a stick or the like according to the size of the hole)

3. Press (*) key and press tombal figures, and press return (*) key. (For example: * 1 *), then it will appear on the screen display as shown below:

4. Press the << / >> to select the appropriate screen.

5. Perform adjustment (adjustment) and the examination. To accept user data input mode press the key (*).

6. To close or complete the Service Mode;

• Press the Reset key to ending the current mode.
• Press the Reset key twice to end the service mode.
• Or the power switch OFF to end the service mode.

Hopefully with this simple tutorial to help friends who have not been able to. Good luck "Service Mode Canon NP"

Komentar →